9
Waves Nx Head Tracker – User Guide
Updating the Firmware
The Nx Head Tracker can update its firmware over Bluetooth. The device leaves the
factory with firmware version 1.17v1.13. As we continue to develop the Nx device,
firmware updates will be released. When a firmware update is available, a message
will appear in red in the Device Status window. Follow these instructions to update the
firmware:
1)
Turn on your Nx Head Tracker device. Find your device in the IMU Device
Name column of the Waves Head Tracker application and check
Connect
.
2)
Confirm that the firmware version on the Nx Head Tracker device is
1.17v1.13. You will see red text indicating that a Firmware update is
available.
3)
Click the
Update
button and follow the update dialog box:
Mac
a)
Press
Update
.
b)
Press
OK
to proceed to the firmware update.
To Next Page
Loading...
General