Waveshare 7.3inch e-Paper (E) - Page 16

7.3inch e-Paper (E)
User Manual
13
Note:
- The Inrush Current means the inrush current occurs during dual booster on sequence, and it is
measured by using Oscilloscope, and extract the Max value
- The Driving Peak Current means the peak current occurs during image update after dual booster
on sequence, and it is measured by using Oscilloscope, and extract the Max value.
- The Module Operating Current data is measured by using Oscilloscope, and extract the Mean
value.
- The typical loading power consumption is measured using associated 25C waveform with
following pattern transition: from full white pattern to color pattern. (Note 7-1)
- The high loading power consumption is measured using associated 25C waveform with following
pattern transition: from full white pattern to noise pattern (including random scattering of 6 colors)
(Note 7-2)
- The minimum VDD value by 2.5V is based on typical application pattern with stable and
continuing power supply. It does not apply on high loading pattern such as Note 7-2.
- The listed electrical/optical characteristics are only guaranteed under the controller & waveform
provided by E Ink
- Vcom value has been set in the IC on the panel.
Note 7-1
The typical power consumption TBD
Note 7-2
The high loading power consumption TBD