Need help?Do you have a question about the Waveshare UART TO ETH and is the answer not in the manual?
General| Brand | Waveshare |
|---|---|
| Model | UART TO ETH |
| Category | Control Unit |
| Language | English |
Details the physical characteristics, integration, and packaging of the hardware.
Outlines the various software capabilities, including network protocols and data handling.
Describes advanced software functionalities, configurations, and management options.
Explains the physical components and pinouts of the UART TO ETH (B) module.
Details the general physical connection requirements for the serial server.
Guides on installing essential configuration software like Vircom.
Explains how to configure device parameters using the Vircom software interface.
Provides steps for testing TCP communication using debugging tools.
Demonstrates setting up and testing a virtual serial port for communication.
Details how to enable and test Modbus TCP to RTU conversion.
Guides on accessing and configuring the device through its web interface.
Explains the necessity of virtual serial port mode for COM port based applications.
Details direct TCP/IP communication, bypassing virtual serial ports for efficiency.
Explains how to configure the device to operate as a TCP client.
Guides on setting up connections to multiple destination servers simultaneously.
Details the configuration for the device to act as a TCP server.
Describes the device's capability to function as both a TCP client and server.
Explains the configuration for enabling two-way UDP communication.
Explains the physical network cabling and connection checks.
Details establishing network TCP connections, including IP settings.
Guides on monitoring data transmission and reception status indicators.
Explains how to use Vircom for remote data monitoring via virtual serial ports.
Details the process of enabling the Modbus gateway function.
Explains the benefits and operation of the storage Modbus gateway.
Covers how to disable the storage function for specific use cases.
Describes enabling and configuring the multi-host access feature.
Explains the configuration parameters for multi-host functionality.
Details Modbus communication with multiple network destinations.
Explains the purpose and methods for sending registration packages.
Describes using the device's MAC address for registration.
Details the Realcom protocol for registration and heartbeat functionality.
Guides on creating custom registration packages with specific formats.
Explains using configuration files for custom registration packages.
Explains heartbeat packets for monitoring connection status and health.
Covers the implicit heartbeat function when no explicit packets are configured.
Details the Realcom protocol's heartbeat mechanism.
Guides on creating custom heartbeat packets and their length constraints.
To Next Page
