SIM7600X 4G DONGLE
Introduction
SIM7600X 4G DONGLE is an industrial-grade 4G dongle, which features up to 150Mbps
downlink rate and 50Mbps uplink rate, supports operating systems including
Windows/Linux/Android. By simply connecting it to a laptop, PC, Raspberry Pi, drone,
industrial computer, or other IoT host device, it is easy to use a 4G network connection on
the go.
Features
Supports 2G/3G/4G network connection
Driver provided, for operating systems including Windows/Linux/Android
Supports TCP/UDP/FTP/FTPS HTTP/HTTPS protocols
Supports network protocols such as
TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS
Onboard USB port, for directly connecting with ARM/X86 hosts or other industrial
computers
Onboard UART port with hardware flow control, for connecting with host boards
like Arduino/STM32
Nano SIM card slot; supports 1.8V / 3V nano-SIM card
3x LED indicators, easy to monitor the working status
Portable customized enclosure, mini size, nice looking
Baudrate support: 300bps ~ 4Mbps (115200bps by default)
Baudrate auto-negotiation: 9600bps ~ 115200bps
Hardware Connection
Prepare：
SIM7600X 4G DONGLE
A 4G Nano SIM card（The card should be workable and 4G accessible）
Assemble the 4G antenna;
Open the SIM card buckle, pull the SIM card slot according to the arrow as below;
To Next Page
Need help?
General
