Waveshare SIM7600 Series User Manual

2、Setting
The driver of SIM7600X has been pre-installed in Raspberry Pi OS (Raspbian), you need to
install it again. You can following the following guide to set up 4G network connection.
There are three ways:
 Raspberry Pi networked via RNDIS ——（Simplest）
 SIM868 PPP Dail-up Networking ——（Simple）
 Setup wwan0 interface for 4G network （Related code） ——（Complicated）
Set up Network for Jetson Nano
1、Hardware connection

Waveshare SIM7600 Series Specifications

General

Brand	Waveshare
Model	SIM7600 Series
Category	Computer Hardware
Language	English