Wavetek 143 - Page 43

7.1 DRAWINGS
The following assembly drawings (with parts lists) and
schematics are in the arrangement shown below.
7.2 ORDERING PARTS
When ordering spare parts, please specify part number,
circuit reference, board, serial number of unit. and, if
applicable, the function performed.
Drawings
CHASSIS
Assembly Drawing
Schematic
Parts List
GENERATOR BOARD
Parts Locater Drawing
Assembly Drawing (Sheet 2 of 2 only)
Schematic
Parts List
TRIG/PULSE BOARD
Parts Locater Drawing
Assembly Drawing (Sheet 2 of 2 only)
Schematic
Parts List
SECTION
PARTS AND SCHEMATICS
7.3 ADDENDA
Under Wavetek's product improvement program, the latest
electronic designs and circuits are incorporated into each
Wavetek instrument as quickly as development and testing
permit. Because of the time needed to compose and print
instruction manuals, it is not always possible to include the
most recent changes in the initial printing. Whenever this
occurs, addendum pages are prepared to summarize the
changes made and are inserted immediately inside the rear
cover. If no such pages exist, the manual is correct as printed.
Drawing No.
0102-00-0589
0004-00-0101
1101-00-0589
0100-00-0556
0101-00-0584
0103-00-0556
1100-00-0584
0100-00-0565
0101-00-0585
0103-00-0565
1100-00-0585
7-1