Wavetronix Click 222 Manual

1 of 4WX-501-0527 • 05.22
Using the Click 222
The Click 222 system surge protection device is designed to prevent electrical surges conducted along underground
cables from damaging the cabinet equipment. The power and RS-485 serial connections on the device are protected
from these incoming surges. It can be used with a number of devices, including the SmartSensor Matrix.
Physical Features
The physical features of the Click 222 include communication and power connections.
TOP
RS-485
Bridge
Connector
T-Bus
Connector
RS-485 Connector
RS-485 Connector
Power Connector
LED Indicators
FRONT
RS-485 B
Connector
RS-485 A
Connector
Click 222
CLK-222
A
A
B
Bridge
RS-485
Jack Pin-out
BCD
PWR RS-485 RS-485
1
6
1
6
1
6
RS-485
Bridge
1
2
3
4
5
6
+485
-485
GND
www.wavetronix.com
Click 222
System Surge Protection
+DC -DC +485 -485 GND
Protected
T-Bus
Protected RJ-11 Connecters
Protected
Unprotected
Surge
Supression
Surge
Supression
Surge
Supression
Surge
Supression
Surge
Supression
Surge
Supression
Connections
The faceplate of the Click 222 has three RJ-11 jacks, which provide the following three independent serial
connections:
■
Topmost jack – control bridge
0527

Wavetronix Click 222 Specifications

General

Category	Industrial Electrical
IP Rating	IP67
Mounting Height	15 to 25 ft (4.6 to 7.6 m)
Power Supply	12 to 24 VDC
Operating Temperature	-40°C to +74°C
Beam Width	12°
Output	RS-485