Wavetronix Click 201 - User Manual

Click 100–400 Series
USER GUIDE

Summary

Chapter 1 - The Power Plant

Connecting to a Circuit Breaker

Connects the Click 210 circuit breaker to the power plant.

Connecting AC Surge Protection

Integrates the Click 230 for AC surge protection in the power plant.

Wiring AC Power into the Click 201;202;204

Details the process of connecting AC power to the converter module.

Chapter 3 - Wiring the Devices

RS-485 Communication

Details how to establish RS-485 communication links.

RS-232 Communication

Explains the process for setting up RS-232 communication.

Chapter 4 - Installing Click Supervisor

Installing Click Supervisor

Step-by-step guide for installing the Click Supervisor software.

Chapter 5 - Using Click Supervisor

Connecting to Your Computer

Explains how to establish a connection between your computer and Click modules.

Accessing the Communication Screen

Serial Communication

Details configuring serial communication parameters.

IP Communication

Covers the setup and use of IP-based communication.

Chapter 6 - Click 100 - 16 Output Contact Closure

Troubleshooting

Provides guidance for resolving common issues with the Click 100.

Chapter 7 - Click 101 - Multi-sensor to Contact Closure

Chapter 8 - Click 104 - 4-channel DIN Rail Contact Closure

Configuration

Covers the multiple methods available for configuring the Click 104.

Front Panel Menu

Click Supervisor

Explains how to use Click Supervisor for advanced configuration.

Chapter 23 - Click 301 - Serial to Ethernet Converter

Chapter 24 - Click 304 - RS-232 to RS-485 Converter

Chapter 28 - Click 400 - 900 MHz Radio

Chapter 29 - Click 421 - Serial to Bluetooth Radio

On-device Configuration

Explains how to configure the Click 421 directly.

Computer Configuration

Guides on using Click Supervisor for detailed configuration.

Wavetronix Click 201 Specifications

General

Brand	Wavetronix
Model	Click 201
Category	Industrial Electrical
Language	English