Need help?Do you have a question about the Wavetronix Click 222 and is the answer not in the manual?
Explains how to navigate and utilize the contents of the user guide effectively.
Details the setup and wiring of the power plant components for the Click series.
Covers the process of connecting various Click devices, including screw terminals and communication protocols.
Provides instructions for downloading, installing, and setting up the Click Supervisor software.
Describes the physical features, configuration, and troubleshooting for the Click 100 module.
Details the features, installation, configuration, and DIP switches for Click 112/114 cards.
Explains the physical features and installation of the Click 200 surge protector.
Covers the physical features, on-device, and computer configuration for the Click 301 converter.
Details the physical features, on-device, and computer configuration for the Click 400 radio.
Outlines the physical features, on-device, and computer configuration for the Click 421 radio.
General| Category | Industrial Electrical |
|---|---|
| IP Rating | IP67 |
| Mounting Height | 15 to 25 ft (4.6 to 7.6 m) |
| Power Supply | 12 to 24 VDC |
| Operating Temperature | -40°C to +74°C |
| Beam Width | 12° |
| Output | RS-485 |
To Next Page
