EasyManua.ls Logo

Wavetronix SmartSensor Matrix Quick Reference Guide

Default Icon
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SmartSensor Matrix
QUICK-REFERENCE GUIDE
www.wavetronix.com
801.734.7200
2
Select the mounting location
1
Ensure that all necessary components are available
Manufacturer’s recommended mounting locations:
A Back side of the mast arm
B Pole on the le side of the approach
C Pole on the right side of the approach
Use the following guidelines to determine the
best mounting location and height:
˽ At location A, the sensors 90° footprint must
be able to capture both the stop bar and the approach; on occasion it could be required to mount at loca-
tion B or C in order to monitor the entire approach.
˽ Wavetronix support should be contacted if a location other than A, B or C is desired.
˽ ere must be at least 6 . (1.8 m) lateral separation between the sensor and the rst lane of interest.
˽ e sensor should be placed at a height of roughly 20 . (6 m). e farther you install the sensor from
the rst lane of interest, the higher the sensor should be mounted.
˽ e sensor’s 140-. (42.7-m) footprint should cover all areas of interest, with no objects blocking the
sensor’s view. Placing the sensor higher will result in less occlusion.
3
Attach the sensor and mount bracket to the pole
1 Insert the stainless steel straps through the slots in the mount bracket, then position the mount on the pole
so the mount head points toward the lanes of interest at roughly a 45° angle. Tighten the strap screws.
2 Align the bolts on the sensors backplate with the holes in the mount bracket. e eight-pin connector
receptacle on the bottom of the sensor should be pointing towards the ground.
3 Place the lock washers onto the bolts aer the bolts are in the mount bracket holes. read on the nuts
and tighten.
You will need a number of items in order to install your sensor, including but not limited to the items below:
˽ Mount bracket and Band-It clamping system
˽ 6-conductor cable and accessory cables
˽ Click 650 or preassembled backplate
˽ Laptop with SmartSensor Manager Matrix
(SSMM) downloaded from wavetronix.com
˽ Bucket truck
A
B
C

Other manuals for Wavetronix SmartSensor Matrix

Question and Answer IconNeed help?

Do you have a question about the Wavetronix SmartSensor Matrix and is the answer not in the manual?

Wavetronix SmartSensor Matrix Specifications

General IconGeneral
BrandWavetronix
ModelSmartSensor Matrix
CategorySecurity Sensors
LanguageEnglish

Related product manuals