Wayfair WF281704AA - User Manual

ASSEMBLY INSTRUCTION
SKU:WF281704AA
BUNK BED
220LBS
300LBS
SAFETY WARNINGS AND GENERAL NOTES：
-Follow the information on the warnings on the bunk bed end structure and on the carton.
-Do not remove the warning label from the bed.
-Always use the recommended size mattress on mattress support, or both, to help prevent the likelihood
of entrapment or falls.
-The top surface of the mattress must be at least 5* (127mm) below the upper edge of the guardrail.
-Do not allow children under 6 years of age to use the upper bunk.
-Periodically check and ensure the guardrail, ladder and other components are in their proper position,
free from damage, and all connectors are tight.
-Prohibit horseplay on or under beds. Always prohibit jumping on the bed.
-Prohibit more than one person on upper bunk.
-Always use the ladder for entering and leaving the upper bunk.
-Do not use substitute parts.Contact the manufacturer or dealer for replacement parts.
-Use of a night-tight may provide added safely precaution for a child using the upper bunk.
-Always use guardrails on both long sides of the upper bunk.
-If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed
against the wall to prevent entrapment between the bed and the wall.
-The use of water or sleep flotation mattresses is prohibited.
-Keep these instructions for future reference.
-We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet.
-Be certain all staples are out of the box before beginning assembly on the shipping carton.
STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that are not designed for use with the bed;
for example, but not limited to, hooks, belts, and jumping ropes.
Page 1 of 8

Summary

Safety Warnings and General Notes

Strangulation Hazard

Warning against attaching items to the bunk bed not designed for use, such as hooks or ropes.

Assembly Steps

Step 1: Base Frame Assembly

Assemble the base frame structure using parts N, H, D, and E with specific hardware.

Step 2: Connect Side Rails

Attach side rails A and AE to the assembled base frame using provided hardware.

Step 3: Assemble Bed Supports

Connect bed support rails L to vertical posts M using hardware.

Step 4: Attach Bed Slats

Connect the assembled bed supports to the main frame using hardware.

Step 5: Install Guardrails and Slats

Attach guardrails F, G, and I to the frame using hardware.

Step 6: Attach Vertical Supports

Connect vertical supports C and J to the frame using hardware.

Step 7: Install Headboards;Footboards

Attach headboard/footboard components B and K to the assembled structure.

Step 8: Connect Upper and Lower Bunks

Join the upper and lower bunk structures using various hardware.

Step 9: Attach Ladder Components

Assemble the ladder using parts P and Q with specific hardware.

Step 10: Final Assembly Check

Complete assembly by connecting the ladder to the bunk bed frame.

Wayfair WF281704AA Specifications

General

Brand	Wayfair
Model	WF281704AA
Category	Indoor Furnishing
Language	English