Need help?Do you have a question about the Wayfair CORNER BOOKCASE and is the answer not in the manual?
Connect the right frame to the shelf and bottom panels using bolts and nuts.
Connect the left frame using wooden dowels, bolts, and nuts.
Fasten the pre-assembled unit using screws.
Cover all exposed holes on the unit with paper covers.
Mount brackets to the frame using screws.
Install brackets onto the wall using anchors and screws.
Tie bookcase to wall brackets with a strap for stability and safety.
This document provides assembly instructions for a corner bookcase, a functional piece of furniture designed to maximize storage in corner spaces within a room. The bookcase serves as a display and storage unit for books, decorative items, and other personal belongings, helping to organize a living space while adding a touch of style. Its corner-specific design allows it to fit snugly into room corners, making efficient use of often-underutilized areas and providing a space-saving solution compared to traditional linear shelving units.
The assembly process for this corner bookcase is designed to be straightforward, with clear, step-by-step instructions and detailed diagrams to guide the user. Before beginning, it is crucial to unpack all components and lay them out on a clean, padded surface, such as a carpet or blanket, to prevent scratching or damage to the parts. This initial step also allows for a thorough check of all included parts against the provided parts list, ensuring that no components are missing before assembly commences. In the event of missing hardware, the manual directs users to contact Wayfair Customer Service for assistance, highlighting a commitment to customer support throughout the assembly process.
The bookcase's construction involves several key components, including right and left frames, multiple shelf panels, and a bottom panel, all secured using a combination of bolts, nuts, screws, and wooden dowels. The assembly begins by inserting nuts into the designated holes on the shelf panels and bottom panel. These nuts are then rotated to align with the bolts, facilitating the attachment of the right frame to the shelf and bottom panels. This initial connection forms the foundational structure of one side of the bookcase. The use of an Allen wrench, provided with the hardware, ensures that all bolts are securely tightened, contributing to the overall stability and rigidity of the unit.
Following the assembly of the first side, the process continues by attaching the left frame to the pre-assembled unit. This step involves inserting additional nuts into the remaining shelf and bottom panels and then using wooden dowels to align and connect the left frame. Bolts are then used to secure the left frame to the nuts, and the Allen wrench is again employed to tighten these connections. The strategic use of wooden dowels in conjunction with bolts and nuts helps to create a strong and stable framework for the bookcase, ensuring that it can safely support the weight of items placed on its shelves.
Once the main structural components are assembled, the next step involves inserting screws into pre-drilled holes on the unit. These screws further reinforce the structure, adding to its durability. A Phillips screwdriver (not included) is required for this step, indicating that some basic tools beyond what is provided may be necessary for complete assembly. After all screws are tightened, the assembly process moves to a finishing touch: covering all visible holes with paper covers. These covers are designed to conceal the hardware, providing a clean and aesthetically pleasing appearance to the finished bookcase, enhancing its visual appeal as a piece of furniture.
A critical feature of this corner bookcase, emphasized in the instructions, is the inclusion and mandatory use of anti-tipping hardware. This safety feature is paramount to prevent the bookcase from tipping over, which could lead to injury or damage to property. The anti-tipping hardware consists of brackets, anchors, plastic straps, and screws. The installation of this hardware involves attaching brackets to both the right and left frames of the bookcase using screws. These brackets serve as connection points to the wall.
The wall attachment process requires marking two desired locations on the wall and drilling holes. Anchors are then inserted into these holes, providing a secure base for the brackets. A hammer may be needed to properly set the anchors into the wall. Once the anchors are in place, the brackets on the bookcase are attached to the wall using additional screws, which are tightened with a Phillips screwdriver. Finally, plastic straps are used to tie the brackets on the bookcase to the brackets on the wall, creating a strong and secure connection that prevents the bookcase from accidentally tipping forward. The manual explicitly states that anti-tipping hardware must be used, underscoring the importance of this safety measure.
In terms of usage, the corner bookcase is designed for static placement in a room corner. Its multiple shelves offer ample space for organizing various items. The open-shelf design allows for easy access to stored items and provides an opportunity to display decorative pieces, personal collections, or a curated selection of books. The compact footprint, owing to its corner design, makes it suitable for smaller rooms or areas where space is at a premium, without sacrificing storage capacity.
Maintenance features for this device are generally minimal, typical for furniture of this type. Regular dusting with a soft, dry cloth is usually sufficient to keep the bookcase clean. For more stubborn marks or spills, a slightly damp cloth can be used, followed by immediate drying to prevent moisture damage to the wood or finish. It is advisable to avoid harsh chemical cleaners, as these can potentially damage the surface of the bookcase. Periodically, it may be beneficial to check the tightness of all bolts and screws, especially after the initial assembly and placement, to ensure the unit remains stable and secure over time. If any connections feel loose, re-tightening them with the Allen wrench or a Phillips screwdriver will help maintain the structural integrity of the bookcase. The anti-tipping hardware should also be checked occasionally to ensure it remains firmly attached to both the bookcase and the wall, providing continuous safety.
The overall design and assembly instructions highlight a product that is intended to be user-friendly, functional, and safe. By following the detailed steps and utilizing the provided hardware and tools (with the exception of a Phillips screwdriver), users can successfully assemble a sturdy and attractive corner bookcase that enhances their living space. The emphasis on anti-tipping hardware reflects a commitment to safety, ensuring that the assembled unit can be used with peace of mind.
General| Product Type | Corner Bookcase |
|---|---|
| Style | Modern |
| Number of Shelves | 5 |
| Assembly Required | Yes |
| Brand | Wayfair |
| Color | White |
To Next Page
