EU Declaration of Conformity 9 Appendix
USM Go Rev. 10 (06/2021) 9-11
9.2 EU Declaration of Conformity
The USM Go conforms to the requirements of the fol-
lowing EU directives:
● 2014/30/EU (Electromagnetic compatibility)
The conformity with the requirements of the
EU directive is proven by the observance of the stan-
dard specifications
●EN 55 011:1998, Class A, Group 2, and
●EN 61 000-6-2:2005
●EN 61 000-6-4:2001
The conformity with the requirements of the EU directive
73/23/EEC, amended by 93/68/EEC, is proven by the
observance of the standard specification
●EN 61 010-1:2001
9.3 Manufacturer/Service
addresses
The ultrasonic flaw detector USM Go is manufactured
by:
Baker Hughes Digital Solutions GmbH
Robert-Bosch-Straße 3
50354 Hürth
Germany
T +49 (0) 22 33 601 111
F +49 (0) 22 33 601 402
The USM Go is manufactured according to the state-of-
the-art methods using high-quality components. Thor
-
ough in-process inspections or intermediate tests and a
quality management system certified to ISO 9001 en
-
sure an optimum quality of conformance and workman-
ship of the instrument.
Should you nevertheless detect an error on your instru-
ment, power the instrument off and remove the batter-
ies. Inform your local Waygate Technologies customer
service and support, indicating the error and describing
it.
Keep the shipping container for any repairs possibly re-
quired which cannot be made on the spot.
To Next Page
