© Copyright
2008-03-20 V0 Rev.01.0
- 23 - WT004139
Operational modes of the dispenser
The head can be connected to host equipment for fuelling management.
Operational modes can be set with the P001 parameter.
Values are 0 e 1.
0 = manual mode
1 = automatic mode
Warning, if the dispenser is connected to the Host, it will shift into automatic mode even if it is set
to manual.
Further information
For further information regarding programming, operation and the meaning of certain error codes displayed
by the electronic head, refer to the related manual.
To Next Page
Loading...
Need help?
General
