Need help?Do you have a question about the WDI Technology ECOFLUSH B8104 and is the answer not in the manual?
Essential safety guidelines and warnings to prevent damage and ensure proper use.
Initial step to turn off the water supply at the wall valve before proceeding.
Depressurize the vessel by flushing the toilet and holding the flush for 3 seconds.
Remove the toilet handle, using caution to avoid cracking the tank.
Remove the toilet tank, noting that some tanks may have three bolts.
Remove the existing ECOFLUSH system from the toilet tank.
Turn on the water supply and check for leaks, readjusting as needed.
General| Model | ECOFLUSH B8104 |
|---|---|
| Operation | Infrared Sensor |
| Flush Type | Automatic |
| Material | Brass, Chrome |
| Product Type | Flush Valve |
| Voltage | DC 6V |
| Battery Life | Approx. 2 years |
| Flush Volume | Adjustable |
| Flush Time | Adjustable |
| Detection Range | Adjustable |
| Installation | Wall Mounted |
| Water Pressure | 20-80 psi |
| Temperature Range | 32°F to 140°F (0°C to 60°C) |
To Next Page
