Webasto 40 Series - Rail Covers and Greasing

40 Series
16
– Remove rails.
– Apply bead of sealant around all fixing holes.
– Place rails and all fixing screws.
Tighten fixing screws to 4 Nm.
– Apply thin layer of grease (Isoflex
®
Topas L32) to
i
nside of rails to ensure smooth sliding.
– Check if there is grease on inside of guides (H).
If not, apply a thin layer of grease (Isoflex
®
Topas
L
32) to inside of guides (H) to ensure smooth
sliding.
grease
grease
(H)
H
H
grease