UniControl 2
Table of Contents
1 About this document 3
1.1 Purpose of the document 3
1.2 Enclosed documents 3
1.3 Using this document 3
1.4 Use of symbols and highlighting 3
2 Safety 3
2.1 Qualifications of installation personnel 3
2.2 Regulations and legal requirements 3
2.3 Safety precautions 4
3 Unit description 4
3.1 Scope of Delivery 4
3.2 Type label 4
3.3 Functional description 4
4 Installing the control element 5
4.1 Notes on installation 5
4.2 Installation location requirements: 5
4.3 Installing the control element 5
5 Initial start-up 6
5.1 Information on initial operation 6
6 Service menu 7
6.1 Bringing up the Service menu 7
6.2 Manual heater selection 7
6.3 Select ADR function 7
6.4 Unlock heater 8
6.5 Reset to factory settings 8
7 Troubleshooting 9
7.1 Fault code output 9
8 Technical data 10
9 Electrical Connections 11
To Next Page
Loading...
