Need help?Do you have a question about the Webasto SmartControl and is the answer not in the manual?
General| Brand | Webasto |
|---|---|
| Model | SmartControl |
| Category | Controller |
| Language | English |
Provides information for the user enabling safe use of the device.
Instructions on how to handle the document and device, including assembly and parts.
Explains the meaning of symbols and emphasis used in the manual for warnings and notes.
Webasto's liability exclusion for defects and damages caused by incorrect use or non-original parts.
States that the installed control element serves for controlling the heater.
Details dangers of explosion, poisoning, suffocation, and fire risks associated with heater operation.
Illustrates the control element and its menu structure, identifying key components.
Lists and explains various symbols used in the manual and on the control element.
Describes the function of the quick start button and the control knob.
Explains how the heater status is indicated by the LED backlight of the quick start button.
Describes how the control element displays operation mode when activated by other Webasto controls.
Details the information shown on the control element display when it starts up.
Introduces the section on air heaters and their heating set-up.
Explains the three heating modes available: Eco, Normal, and Boost.
Describes using the quick start button to activate heating with preset options.
Details how to switch on the heater and select heating mode via the main menu.
Explains how to adjust the desired temperature while the heater is operating.
Guides on changing the heating mode while the heater is already running.
Describes how to adjust the remaining operating time of the heater.
Explains the procedure to switch off the heating function of the heater.
Introduces the ventilation function and available fan speeds.
Describes activating ventilation using the quick start button.
Details setting ventilation and fan speed via the main menu.
Explains how to adjust the remaining operation time for the ventilation function.
Guides on setting the fan speed for ventilation while it is running.
Explains how to switch off the ventilation function.
Details the timer function for programming heating or ventilation start times.
Guides on creating and activating timed settings for the heater.
Explains how to deactivate, edit, or remove programmed timer settings.
Introduces the section on water heaters.
Explains heating set-up procedures for water heaters.
Describes using the quick start button for water heater heating.
Details switching on water heater heating via the menu.
Guides on adjusting the remaining operation time for water heater heating.
Explains how to switch off heating for water heaters.
Introduces setting ventilation for water heaters.
Describes activating water heater ventilation using the quick start button.
Details setting ventilation and fan speed via the menu for water heaters.
Guides on adjusting remaining operation time for water heater ventilation.
Explains how to switch off ventilation for water heaters.
Details timer programming for water heaters.
Guides on creating and enabling timers for water heaters.
Explains managing programmed timers for water heaters.
Guides on how to remove all programmed timers for water heaters.
Covers general settings for the control element.
Details quick start settings specifically for air heaters.
Explains how to configure heating settings within the quick start menu for air heaters.
Explains how to configure ventilation settings within the quick start menu for air heaters.
Details quick start settings for water heaters.
Explains how to configure heating settings in the quick start menu for water heaters.
Explains how to configure ventilation settings in the quick start menu for water heaters.
Guides on setting the current day of the week for the control element.
Details how to set the current time on the control element.
Explains how to change the language displayed on the control element.
Guides on selecting the preferred temperature unit (°C or °F).
Explains how to adjust the screen brightness level.
Guides on configuring the screen timeout or shut-off behavior.
Explains how to configure day and night illumination settings for the screen.
Details how to access and view system information like software status.
Explains how to view stored error codes and information related to malfunctions.
Guides on how to reset the control element to factory default settings.
Lists and describes specific error codes for control elements and heaters.
To Next Page
