16
Turn the control knob in order to choose the
desired temperature.
Press the control knob in order to confirm
selection
Temperature
Heating
Heating starts functioning.
Heating symbol and selected heating temperature
are shown in the display.
Quick start button shows green light.
4.3.3 Temperature set during operation
3
The heater is in the heating mode.
Turn the control knob in order to choose the
desired temperature.
Press the control knob within 5 seconds in
order to confirm selection.
4.3.4 Setting heating mode during operation
3
The heater is in the heating mode.
Press the control knob in order go from tem-
perature selection to heating mode selection.
Turn the control knob in order to choose the
desired heating mode*.
To Next Page
Loading...
