Webasto SmartControl - 4.6 Water heater; 4.7 Heating set-up; 4.7.1 Switching on the heater by means of quick start button

27

Press the control knob.
The stored timers appear in the display.

Turn the control knob clockwise until “Delete
all” message is shown in the display.
Delete all
Timers

Press the control knob in order to confirm
selection.
“OK” is shown in the display.
Delete all
Timers

Press the control knob in order to confirm
selection.
All programmed timers have been removed.
The main menu is shown in the display.
Timers
4.6 Water heater
4.7 Heating set-up
4.7.1 Switching on the heater by means of quick start button
“Quick start” function enables heating or ventilation by simply pressing the but-
ton. Operation time can be initially set. Instruction manual and description of the
settings can be found in the chapter “Setting the quick start”.
3
Quick start button is programmed for heating.
www.butlertechnik.com
www.butlertechnik.com