Webb WEH12R - Page 17

17
MAINTENANCE & STORAGE
WARNING
Improper maintenance & storage of the machine may void your warranty. Keep the machine clean for better
and safer performance.
MAINTENANCE
• Before each use, check all nuts & bolts to be sure they are sufficiently tightened.
• We recommend only manufacturer original parts are used when maintaining this machine. Failure to do so
could invalidate your manufacturer’s warranty.
• The cutting cylinder blades should be sharpened every two years, or sooner when damaged by foreign
objects to maintain performance. Uneven blade sharpening will cause poor cutting. We therefore
recommend all cylinder blade sharpening is undertaken by a trained professional.
CLEANING
• Keep your lawnmower clean.
• Thoroughly clean the lawnmower at the end of each use, paying attention to grass cuttings in and around
the wheels, roller and blades.
• We suggest regular application of multi-purpose oil or lubricant (i.e. WD-40). This should be applied to all
cutting surfaces and cutting reel axle shaft.
Never put hands inside the cylinder when it is rotating.
STORAGE
• For years of trouble-free service, make sure the lawnmower is clean and dry before storing.
• Before storing, clean the lawnmower thoroughly as indicated above.
• Store indoors or in a protected area during severe weather and winter months.
TROUBLE SHOOTING
Problem
Answer
Fix
The lawnmower is not cutting?
Grass is too high
Use suitable tool to reduce grass
height to below 40mm.
Height adjustment required
Adjust to suitable even height
Wheel does not turn?
Stone is lodged into gear of wheel.
Foreign material between cylinder
& cutter bar.
Inspect & remove.
(Wear gloves to protect hands from
blades and remove material.)
The cut is uneven?
The blade may be damaged
Visit your local Webb dealer to have
the blade inspected.
Height adjustment required
Adjust to suitable even height.
Notes
INSTRUCTION MANUAL