Fig 14
Side Discharge:
1. Fit the mulch plug to the rear
discharge opening of the mower
and close the rear flap.
2. Lift the cover on the side of the
mower and attach the side
discharge chute as shown in the
diagram.
3. The mower will now eject grass
from the side discharge chute.
Mulching:
1. Fit the mulch plug to the rear
discharge opening of the mower
and close the rear flap.
2. Ensure that the side cover is in
the closed position (with the
discharge chute removed).
3. The mower will now recycle the
chopped grass into the lawn
surface.
Tip: To mulch efficiently only cut
one third of the length of the grass.
Fig 15
Fig 16
Fig 17 Fig 18 Fig 19
FITTING THE MULCH PLUG
FITTING THE SIDE DISCHARGE
To Next Page
Loading...
