CABLE TIDY
1. Place the cable tidy over the handle assembly and house the cables into the tidy.
RECOIL STARTER HANDLE
Please note the actual housing is locate on the upper handle and not within the handle fixings as imaged
below.
1. To ease starting of the machine, the recoil starter handle can be housed on the handle assembly.
2. To house it correctly, pull the OPC/Brake lever towards the main handle. Do not let go.
3. Now grab the recoil starter handle and slowly lift it towards the housing. There will be some resistance
and do not pull too hard. Wrap the Starter rope through the housing and seat the recoil starter housing.
4. You can now release the OPC/Brake lever.
CUTTING FUNCTIONS
NOTE: These functions can be converted by changing accessory setting. Please see the following chart for
detail setting.
Fitted Mulch Plug Grass Collector
To Next Page
Loading...
