Weber 6741 - Page 3

3
1. POWER – Press and hold for 2 seconds to turn the receiver unit ON or OFF.
2. [1] –
 Press to scroll through setting meat type and doneness and target temp
associated with “probe 1”
.

Hold and press key "1" + "2" at normal mode 2 seconds to enter pairing mode
3. [2] –
 Press to scroll through setting meat type and doneness and target temp
associated with “probe 2”.
 Hold and press key "1" + "2" at normal mode 2 seconds to enter pairing mode
4. [UP] –
 Add target temp under probe1 or 2 temp setting mode (long press for quick
scroll)
 Select meat type and doneness under setting meat type and doneness
 Add timer minute value under timer setting mode(long press for quick scroll)
5. [DOWN] –
 Decrease target temp under probe1 or 2 temp setting mode(long press for
quick scroll)
 Select meat type and doneness under setting meat type and doneness
 Decrease timer minute value under timer setting mode (long press for quick
scroll)
6. [C/F] – Press to toggle between Centigrade and Fahrenheit
7. [TIMER] –
 Toggle timer start and stop(short press)
 Clear timer setting back to 0:00 at timer stop mode (long press for 2 seconds)