What to do if the Weber Indoor Fireplace burner flame pattern is erratic?
If the burner flame pattern is erratic, the flame is low when the burner is on HIGH, or the flames do not ignite all burner holes on your Weber Indoor Fireplace, it might be due to blocked burner holes. To resolve this, clean the burner holes, referring to the Maintenance Section for instructions.
Why Weber FLAME Indoor Fireplace burner does not light?
If the burner of your Weber Indoor Fireplace does not light, or the flame is low in the HIGH position, several factors could be at play. First, check if the fuel hose is bent or kinked and straighten it. Second, verify if the igniter is functioning correctly; if not, replace it. Lastly, inspect the igniter box for any obstructions and remove them, consulting Step 11 of the “Assembly” Section (pg. 10).
How to fix dark orange flame on Weber Indoor Fireplace?
If the burner of your Weber Indoor Fireplace burns with a dark orange flame and produces heavy sooting, it may be due to a blockage of holes. Clean the Spider / Insect Screen. Refer to the Section “Annual Maintenance” for instructions.
Specific installation guidance for Canada.
Instructions for operating the fireplace.
Guidance on storing the fireplace when not in use.
Procedures for cleaning the fireplace.
Instructions for connecting the natural gas supply.
Procedure for connecting the gas hose to the supply and fireplace.
Procedure for checking gas connections for leaks.
Step-by-step guide for lighting the fireplace.
Instructions on how to turn off the fireplace.
Alternative method for lighting the fireplace.
Information and inspection of the spider/insect screen.
Guidance on yearly inspection and cleaning of the screen.
Steps for cleaning the main burner.
Description of correct and incorrect flame patterns.
Troubleshooting the ignition system for lighting issues.
General| Brand | Weber |
|---|---|
| Model | FLAME |
| Category | Indoor Fireplace |
| Language | English |
To Next Page
