Need help?Do you have a question about the weBoost Connect 4G 470003 and is the answer not in the manual?
General| Product Type | Cell Phone Signal Booster |
|---|---|
| Model Number | 470003 |
| Power Supply | 12V DC |
| Frequency Bands | 700 MHz, 1900 MHz |
| Compatibility | All North American carriers |
Use surge protection and ensure indoor, temperature-controlled environment for safe operation.
Use two people: one outside to rotate antenna, one inside to monitor phone signal strength.
Utilize phone's test mode for accurate numerical signal strength readings.
Rotate outside antenna 45 degrees at a time, waiting 30 seconds for signal reset.
Understand dB readings: closer to zero means stronger signal.
Connect booster to a surge-protected power strip (min. 1000 Joule).
Confirm all antenna and booster cables are securely connected before powering.
Plug the power supply into the booster and then into a surge protector power strip.
Explains the meaning of green, red, and orange indicator lights for booster status.
Steps to resolve red indicator lights, focusing on connections and antenna separation.
Steps to resolve orange indicator lights, involving antenna repositioning.
Covers separation, power supply, environment, and power line safety.
Ensures antennas are placed safely regarding distance from people and height.
Includes registration, approved parts, FCC compliance, and E911 warnings.
Detailed technical specifications including gain, bandwidth, power output, and noise.
To Next Page