EasyManua.ls Logo

weBoost DRIVE 4G-X OTR - Connecting Coax Cables; Connecting to Power Supply; Powering Up the Booster

weBoost DRIVE 4G-X OTR
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Step 4
Step 3
INSIDE ANTENNA INSTALLATION
Identify a place on the side of the seat to mount
the Slim Low Profile Antenna. The location
should be at least 18 inches but no more than
36 inches from where the cellular device will be
used. Peel off the backing of the Velcro® and
attach to seat.
CONNECT COAX CABLES TO DRIVE 4G-X
Select a location for the Drive 4G-X that is
free from excessive heat, direct sunlight and
moisture and that has proper ventilation. Good
locations include underneath a seat or under the
dashboard. Connect the cable from the 4G-OTR
Antenna to the port labeled “Outside Antenna”
on the Drive 4G-X and connect the cable from
the Slim Low Profile Antenna to the port labeled
“Inside Antenna” on the booster.
Step 5
CONNECT TO POWER SUPPLY
Connect the power supply cord to the end of the
Drive 4G-X labeled “Power.” NOTE: Do NOT con-
nect the power to the Signal Booster until you have
connected both the Inside and Outside Antennas.
Slim Low
Profile
Antenna
Slim Low
Profile
Antenna
4G-OTR
Antenna
https://cellphonesignalbooster.us/weboost-drive-4g-x-otr-470210-truck-signal-booster-kit

Other manuals for weBoost DRIVE 4G-X OTR

Related product manuals