weBoost eqo Install Guide

Coax Cable
6 ft.
Power Cable
Coax Cable
-90dB
For optimal signal boost, place the EQO booster in the
room of your home that has the strongest cell signal.
Please refer to our Full Install Guide for more options on how
to properly install your booster: https://cellphonesignalbooster.us
Congratulations! Once your booster is running, please allow some time for your
phone to adjust to your new signal.
Read more about it here at https://cellphonesignalbooster.us
Quick Install
Guide
Step 2
Step 3
Step 5
HOW TO MEASURE YOUR CELL SIGNAL
Connect the supplied Coax Cable and
Power Supply on the side of the Booster.
Place the Antenna where you need to boost your
signal. It should face the same direction as the
Booster and stand at least 6 feet away from it.
Connect the Power Supply to a surge protected
AC power strip with at least 1000 Joule rating.
Step 1
Place your Booster in the area with the
strongest cell phone signal. The LED light
should be facing into the room.
Step 4
Connect the other end of the Coax Cable to
the Antenna.
https://cellphonesignalbooster.us/blog/field-test-mode-an-
overview-enabling-it-on-your-phone/
Place your phone in test mode so the numerical signal strength
can be read. For help in finding the test mode for your phone
please go to:
-80dB

weBoost eqo Specifications

General

Brand	weBoost
Model	eqo
Category	Cell Phone Accessories
Language	English