Need help?Do you have a question about the weBoost eqo and is the answer not in the manual?
General| Brand | weBoost |
|---|---|
| Model | eqo |
| Category | Cell Phone Accessories |
| Language | English |
Utilize phone's test mode for accurate numerical signal strength readings.
Check cellular bar indicator on display for strongest signal location.
Place booster in the area with the strongest signal, LED facing into the room.
Connect the supplied Coax Cable and Power Supply to the booster.
Position the antenna at least 6 feet away from the booster, mount on wall.
Ensure booster and antenna face same direction; maintain 6ft separation.
Connect the other end of the Coax Cable to the Antenna.
Plug in the booster; light will blink red and green for 10 seconds.
Customer support available Mon-Sun via phone and website.
Separation prevents oscillation (noise) and booster shutdown.
Covers device usage, environment, and FCC compliance requirements.
Includes antenna placement, registration, and E911 location disclaimer.
Indicates booster is functioning properly with no installation issues.
Indicates strong signals causing overload or band shutdowns.
Indicates oscillation (feedback loop) causing booster to reduce gain.
Steps to resolve solid or blinking orange lights without desired boost.
Steps to resolve solid or blinking red lights causing oscillation.
Troubleshoot a dark booster by checking power supply and resetting.
Details warranty coverage for defects and return/repair process.
To Next Page
