IT IS VERY IMPORTANT
TO POWER YOUR SIGNAL
BOOSTER USING A SURGE
PROTECTED AC POWER
STRIP WITH AT LEAST A 1000
JOULE RATING.
FAILURE TO DO THIS WILL VOID YOUR WARRANTY
IN THE EVENT OF A POWER SURGE OR LIGHTNING
STRIKE.
! !
THE SIGNAL BOOSTER UNIT IS DESIGNED
FOR USE IN AN INDOOR, TEMPERATURE-
CONTROLLED ENVIRONMENT (LESS
THAN 150 DEGREES FAHRENHEIT). IT IS
NOT INTENDED FOR USE IN ATTICS OR SIMILAR
LOCATIONS SUBJECT TO TEMPERATURES IN
EXCESS OF 150°F.
Contents
Package Contents ...............................................................3
Optional Accessories ............................................................3
Before Getting Started ...........................................................3
Quick Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Installing the Mounting Plate (sold seperately) .......................................4
Installation Diagram .............................................................5
Additional FAQ ..................................................................5
Warnings and Recommendations ..................................................6
Signal Booster Specifications .....................................................7
Guarantee and Warranty ..........................................................8
Installation Instructions for the Following weBoost Signal Booster:
Signal 3G™ 800/1900MHz SmarTech
®
Signal Booster
Model #470009 FCC #PWO460009 IC 4726A-460009
The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
To Next Page
Loading...
General