To Next PageTo Next Page
Need help?Do you have a question about the Weed Eater FL25 and is the answer not in the manual?
General| Engine Type | 2-Cycle |
|---|---|
| Engine Displacement | 25 cc |
| Cutting Width | 16 inches |
| Weight | 10.5 lbs |
| Starting System | Recoil |
| Shaft Type | Straight |
| Handle Type | Loop |
| Line Diameter | 0.095 inches |
Guidelines for safe operation by the user, including dress code and alertness.
Safety precautions related to the unit itself and its maintenance procedures.
Precautions for handling and using fuel safely to prevent fire and spills.
Instructions for adjusting the handle position for optimal use and safety.
Steps for properly installing the safety shield and line limiter blade.
Familiarize yourself with the unit's controls and components before use.
Essential safety checks and information before operating the unit.
Guidelines and warnings for safely fueling the engine with the correct mixture.
Procedures for safely shutting down the engine using the ON/STOP switch.
Detailed steps for starting the engine from cold, warm, or flooded states.
Recommended stance and protective gear for safe operation.
How to extend and manage the trimmer line during operation by tapping the head.
Techniques for trimming, scalping, mowing, and sweeping for optimal results.
Inspecting the unit for loose or damaged components before use.
Procedures for cleaning and inspecting the unit after each use.
Instructions for cleaning the air filter to maintain engine performance.
Steps for replacing the spark plug for optimal engine starting.
Guide on how to replace the trimmer line spool and load new line.
How to adjust the engine's carburetor for optimal performance and idling.
Specific instructions for adjusting the engine's idle speed.
Preparing the unit for long-term storage during off-seasons or extended periods.
Notes regarding fuel system preparation, including use of stabilizers.
Procedures for preparing the engine for storage, including oiling and spark plug.
Outlines the owner's and manufacturer's responsibilities for emissions control.
Explains what parts and defects are covered by the manufacturer's warranty.
Details the owner's duties regarding required maintenance and care.
Covers diagnostic fees and liability for related damages to engine components.
Lists exclusions from warranty coverage, including abuse, neglect, and modifications.
Instructions on how to file a warranty claim and find authorized service locations.
Responsibilities for maintaining emission-related parts as defined in the manual.
