Need help?Do you have a question about the WEEFUN TINA2 S and is the answer not in the manual?
General| Layer Resolution | 0.1-0.4 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Supported Filaments | PLA |
| Printing Technology | FDM |
| Supported Materials | PLA |
| Print Speed | 10-100 mm/s |
| Connectivity | USB |
| Weight | 10 kg |
| Machine Weight | 10 kg |
| Nozzle Temperature | 180-210℃ |
Critical safety guidelines for operating the 3D printer.
Detailed technical specifications of the TINA2S 3D printer.
Guides through the automatic bed leveling process for optimal first layer adhesion.
Details how to manually set nozzle and bed temperatures for printing.
Adjusts the nozzle-to-bed gap for better print adhesion.
Instructions for updating the printer's motherboard firmware.
Instructions for updating the printer's Wi-Fi module firmware.
Allows real-time adjustment of print parameters during operation.
Temporarily halts printing, allowing filament changes or other actions.
Saves print progress before powering off the printer.
Step-by-step instructions for loading filament.
Step-by-step instructions for unloading filament.
How to select and start prints using a TF card.
Adjusting settings like pause, temperature, and Z offset while printing.
Fine-tuning the nozzle-to-platform gap mid-print.
Explains how the printer resumes interrupted prints after power loss.
Step-by-step guide to installing the Wiibuilder software on a PC.
Overview of the Wiibuilder software interface and its tools.
Detailed settings for customizing print parameters in Wiibuilder.
Instructions for controlling the printer using the PoloPrint Pro mobile app.
Troubleshooting general print failures and error messages.
To Next Page