We also offer Jump & Trickle Charge
Tethers that give you easy access to
those hard-to-reach battery terminals -
perfect for boats, ATVs, motorcycles and
more!
The tethers are also equipped with an
SAE adapter so you can connect to your existing battery maintainer with the
same cable you use for jump starting! Tethers are sold separately and can be
found online at myweego.com.
OPTIONAL ACCESSORIES
WEEGO CUSTOMER SUPPORT
We are dedicated to providing the best possible service. To reach Customer
Support, visit myweego.com/support or email support@myweego.com.
© 2017. Weego is a division of Paris Corporation. Patents Pending. All Rights Reserved. Rev 1/17
QUICK START GUIDE
Smarty Clamps
®
Socket
Battery Indicator Lights
5V/3A Recharge (Input) Port
CHARGE UP YOUR WEEGO 22s
When you unpack your new Weego Jump Starter 22s for
the first time, charge it up to 100% using the Micro
USB Charging Cord provided. Make sure you use a USB
enabled wall adapter (like the one that comes with your
smartphone or tablet) with an output of 2.1A or greater to
charge as quickly as possible.
(Output ratings are always
located on the USB adapter
).
Weego 22s lasts up to 3 years without recharging, but to
keep it topped off, recharge it every 6 months or so.
Weego 22s will allow you to charge & discharge your
unit up to 1000 times, which will give you a good 3-5
years of active use.
GETTING TO KNOW WEEGO 22S
It takes 2.5 hrs. to fully charge using a
2.1A USB adapter. The indicator lights
will flash one by one while the unit is
charging. A solid light indicates a
completed level of charge.
Smarty Clamps
®
Indicator
Lights
Sequence:
20% Charged
40% Charged
60% Charged
80% Charged
100% Charged
To Next Page
Need help?
General
