7
MY UNIT WON’T TURN ON AFTER I HAVE USED IT TO JUMPSTART MY VEHICLE.
For models 44.1 & 66.1
If Weego will not power on after a jump start, it needs to be connected to a charger to “reset” – this
action only requires a few seconds on the charger.
Connect Weego to provided wall charger
If on the road, connect Weego do DC charger provided (cigarette charger) –
even if your car battery is dead, it will still have enough power to reset your
Weego.
Please note: It is normal for the LED battery indicator lights on your unit to
flash when you plug your unit into the charger.
For models 44s, 70 & 120
Please reach out to support@myweego.com to let them know about this issue.
JUMPING LITHIUM-ION BATTERIES
Our products are primarily for jumping lead-acid batteries but can also be used with Lithium-Ion
vehicle batteries. We highly recommend consulting with your dealer service team to ensure jump
starting is performed as directed by the battery manufacturer.
JUMPING GEL/AGM BATTERIES
Our products are intended for jumping all lead-acid batteries, which includes varieties like GEL or
AGM.
JUMPING HYBRID OR ELECTRIC VEHICLES
Hybrid Vehicles – Our products can be used on the 12V lead-acid or lithium-ion starting battery, as
you would with a gasoline vehicle starting system.
Electric Vehicles – A Weego jump starter can be used to power a depleted 12V lead-acid or
lithium-ion accessory battery, you will have to consult with your dealer service team for proper
steps needed on your specific make & model EV.
CPAP MACHINES
For models 44.1/66.1/70 & 120
You can connect to your CPAP via our 12V DC adapter, but the CPAP adapter must be 12V and pull
no more than 10A (120W total). We have not done any testing on CPAP machines and each one is
different; therefore, we cannot guarantee any run durations and suggest you do a test run to ensure
that the machine can work throughout the night.
CAN I USE MY WEEGO AS A TRICKLE CHARGER?
Weego jump starters are not meant to be used as trickle chargers and will not function as such.
They are strictly jump starters, designed for momentary high-output bursts of power.
To Previous Page
Loading...
