Wega P700 User Manual

TURNTABLE ASSEMBLY TONEARM ASSEMBLY
Do not connect the power cord or the connecting cords until the @ Secure the tonearm to the arm rest.
assembly is complete. @ Plug the supplied cartridge sheli into the tonearm and turn the
Remove all packing material and clean the cabinet. jocking collar counterclockwise until the shell is firmly locked.
Save the packing box and materials for possible future use.
Cartridge shell
@ Remove the red-painted.transit screws using a screw driver, coin
or something similar. Save these screws, since they will be re-
quired when repacking.
@ Carefully place the platter on the motor board by matching the
center hole and the center spindle. Be careful that no foreign ob-
jects lodge under the platter.
@ Do not touch the magnetic coating or the magnetic pick-up head. p
© Place the rubber mat on the platter. Rocking eaitat Benes
@ Insert the counterweight by turning it.
Magnetic
coating
(inside the rim)

Wega P700 Specifications

General

Brand	Wega
Model	P700
Category	Turntable
Language	English