Wegener 6400 User Manual

iPUMP 6400 QUICK START GUIDE
8000009-03 Rev. A 12 Professional Video Professional Video
Figure 4. iPump Web Interface Status Page
6. Shut down your iPump from the front panel. Navigate from
the home screen to the Shutdown screen as follows:
Step Press Display / Field Details Screen Type
j.
ww UNIT SETUP Menu
k.
ww
UNIT STATUS DETAIL Menu
l.
ww
NAVIGATION HELP Menu
m.
ww
UNIT SHUTDOWN Menu
n.
ENTER
Are You Sure? !!!
No-ESC, Yes-ENTER
(Press ESC to cancel or ENTER to shut down.)
User Input -
Selectable
o.
ENTER Press ESC to cancel or ENTER to shut down. Status Display
At shutdown, the LCD screen becomes blank and the LED
indicators go out. The iPump is now shut down. The power
switch on the rear panel may be left in the on position for quick
restart from the front panel. (See note in Step 4).
iPUMP 6400
Professional Media Server
Quick Start Guide

Wegener 6400 Specifications

General

Brand	Wegener
Model	6400
Category	Server
Language	English

Summary

Shutting Down the iPump

Navigate to Unit Shutdown Menu

Access the UNIT SETUP, UNIT STATUS DETAIL, NAVIGATION HELP, and UNIT SHUTDOWN menus.

Confirm Shutdown

Confirm the shutdown process by pressing ENTER when prompted 'Are You Sure?'.

Accessing iPump Web Interface

Navigate to IP Setup

Follow menu steps from HOME to IP SETUP to display the IP Address screen.

Connect to Web Interface

Open a web browser on a connected computer and enter the iPump's IP address.

View Status and Navigate Tabs

Access the iPump's Status page and navigate through available tabs like Files, Schedule, Status, Help, or Setup.

Initial Setup and Connections

Unpack and Place Unit

Remove iPump from carton, inspect for damage, and place on a stable surface or in a rack.

Connect Peripherals

Connect LNB, monitor, and Ethernet LAN cables to the appropriate ports on the iPump.

Configuring Decoder Output

Navigate to Decoder Setup

Access the DECODER SETUP screen via the front panel menu system.

Set Decoder Number and Program

Select the decoder number and program source (e.g., FOLLOW TUNE or specific PROGRAM number).