Need help?Do you have a question about the Wegener iPUMP 6400 and is the answer not in the manual?
General| Category | Server |
|---|---|
| Model | iPUMP 6400 |
| Network | Dual-port 10GbE |
| Form Factor | 2U Rackmount |
| Processor | Intel Xeon E5-2600 v4 series |
| Memory | Up to 1.5TB DDR4 |
| Storage | Up to 24 x 2.5" drives |
| Power Supply | 800W |
Overview of the manual's structure and purpose.
Introduction to the iPump 6400, its features, and capabilities.
Technical specifications of the iPump 6400.
Basic safety precautions for installation and operation.
Definitions of technical terms and abbreviations used in the manual.
Instructions for unpacking and inspecting the unit and accessories.
Guidelines for selecting a suitable location and mounting the unit.
Details on connecting various cables and peripherals to the unit.
Overview of iPump 6400 operation via front panel, Compel, or web browser.
Description of front-panel controls like LCD, buttons, and LEDs.
Steps for starting up and shutting down the iPump 6400.
How to navigate and operate the iPump 6400 using the front panel interface.
Initial setup procedures for date/time, unit label, and network settings.
Setting up date/time, unit label, and proxy settings.
Configuration of optional features like Modem, Genlock, and SMB.
Initial configuration using the web browser interface.
Performing operations categorized by function via web browser.
Procedure to switch between different software versions.
Basic maintenance procedures for the unit.
Guidance on resolving common operational issues.
Explanation of front panel LED indicator meanings.
Table of front panel messages and their possible causes.
Details of the product warranty.
How to contact customer service and return a product for service.
To Next Page
