WEI-YA HI-072CS+INHIBIT User Manual

HUAI I ELECTRONICS CO.,LTD
FRONT INSERTING TYPE
DIGITAL COMPARABLE ELECTRONIC
COIN SELECTOR
HI-072CS+INHIBIT
Red DC +12V
Coin Signal
GND (Ground)
Line
Green Line
Black Line
Gray Line Inhibit Signal
INSTALLATION
J2
Yellow line
Input
Amplifier
C
Speaker
STEP1
Change the right coin for use from the clamp
STEP2
Adjust the right insert size for use from the front panel in back side
STEP3
STEP3
STEP5
"TIMER SWITCH" for synchronizing your system
100ms(Slow Speed/Long Pulse)
50ms(Medium Speed/Medium Pulse)
30ms(Fast Speed/Short Pulse)
STEP6
STEP6
Adjust VR sensitivity tunning
clockwise slack selection
anti-clockwise strict selection
Adjust VR sensitivity tunning
clockwise slack selection
anti-clockwise strict selection
STEP7
4 lines with 4 pins
STEP8
STEP8
Alarm connect way
Alarm connection input
Select the right mode:
Normal Open/Normal Close
Default is Normal Close.
"TIMER SWITCH" for
synchronizing your system
100ms(Slow Speed/Long Pulse)
50ms(Medium Speed/Medium Pulse)
30ms(Fast Speed/Short Pulse)
COIN SPECIFICATION
USER EQUIPMENT
Voltage:DC 12V +10%
Currents:200mA
Diameter:18mm~31mm
Thickness:1.2mm ~ 3.0mm
*Inhibit: Contain bidirector control function can enable or disable
machine action.
STEP5
Select the right mode: Normal Open/Normal Close
Default is Normal Close.
1
2
3
4
STRICT
SLACK
VR Tunning
LED
Red Line DC +12V
Green Line Coin Signal
Black Line GND (Ground)
Gray Line Inhibit Signal
(White) (Counter)
White Line Counter
STEP4
Inhibit / Low: Disable Machine Action When Input Voltage <+1V
Inhibit / High: Disable Machine Action When Input Voltage
in +3V~+12V
N.C.
N.O.
INHIBIT / LOW
INHIBIT / HIGH
J2
COIN SPEED
SLOW MEDIUM FAST
100ms 50ms 30ms
Red(White) DC +12V(Counter)
Coin Signal
GND (Ground)
Line
Green Line
Black Line
Gray Line Inhibit Signal
White Line Counter
6 lines with 5 pins
5

WEI-YA HI-072CS+INHIBIT Specifications

General

Brand	WEI-YA
Model	HI-072CS+INHIBIT
Category	Cash Counters & Coin Sorters
Language	English

Summary

HI-072CS+INHIBIT Installation Guide

Coin Fit and Size Adjustment

Adjust the right coin for use from the clamp and the insert size from the front panel.

Operational Mode and Inhibit Settings

Select Normal Open/Normal Close mode and configure inhibit functions based on input voltage.

Synchronization and Sensitivity Tuning

Set timer switch for system synchronization and adjust VR sensitivity for coin selection.

Wiring and Alarm Connections

Details on 4-pin/5-pin wiring configurations and alarm connection methods.