To Next Page
A
andrewfitzpatrickAug 11, 2025
How to tighten slack cables on Weider Home Gym?
- SSierra FryeAug 11, 2025
To address slack in the cables of your Weider Home Gym before resistance is felt, several adjustments can be made: * First, ensure the cables are properly tightened. * Second, consider relocating the 90mm Pulley (15) to the lower hole in the Long “U”-bracket (57). You should remove the M10 Nylon Locknut (21) and the M10 x 48mm Bolt (12) from the Cable Trap (66), Pulley, and “U”-bracket, then re-attach the Pulley and Cable Trap. * Finally, check and tighten the M8 Nylon Locknuts (3) located at the end of the Long Cable (23) or the Short Cable (58).
General
