To Next PageTo Next Page
Need help?Do you have a question about the Weider Pro power Stack 831.159832 and is the answer not in the manual?
General| Model Number | 831.159832 |
|---|---|
| Exercises | Over 30 |
| Weight Capacity | 300 lbs |
| Material | Steel |
| Included Accessories | Lat bar, Ankle strap |
Provides physical dimensions for the assembled weight system.
Lists essential tools for assembling the weight system.
Explains how to identify components using the part identification chart.
Outlines the four main stages of the weight system assembly process.
Emphasizes the need for two people and sufficient time for assembly.
Details the initial steps for assembling the base and uprights of the weight system.
Covers the assembly of the leg lever, press frame, and press arms.
Details the routing and attachment of various cables for the weight system.
Covers the attachment of backrests and seats to the weight system frames.
Explains how to attach accessories like the Lat Bar and Nylon Strap to pulley stations.
Describes how to adjust the position of the leg press plate using an adjustment pin.
Details how to attach and adjust the height of the curl pad.
Guides users on how to change the weight setting using the weight pin.
Explains how to remove slack from cables by adjusting pulleys or attachment points.
Lists cables by identification number, length, and type.
Provides helpline numbers for assembly, operation, and service inquiries.
Details how to order replacement parts and information needed for ordering.
