Weider powerguide x2 - Part Identification Chart

1” Round Cover Cap (30)–2
4” Weight Pin (50)–1
Plastic Bushing (79)–2
4 1/2” “L” Pin (61)–2
5/16” Knob (15)–1
“J” Pin (56)–1
This chart is provided to help you identify the small parts used in assembly. Note: Some parts may have been pre-
assembled for shipping purposes; if you cannot find a part in the parts bags, check the frame to see if it has been pre-
assembled.
REMOVE THIS PART IDENTIFICATION
CHART FROM THE MANUAL!
Weight Bumper (40)–2
3/4” Round Cap (10)–4
1” Round Cap (9)–4
1 3/4” Inner Cap (24)–6
1 1/2” Inner Cap (19)–3
2” Outer Cap (37)–4
2” Inner Cap (36)–3