Weider WEBE0635.1 - Part Identification Chart

M10 Washer (11)
M8 Washer (31)
M6 Washer (32)
M8 Nylon Locknut (30)
M10 Nylon Locknut (15)
M10 x 160mm Bolt (27)
M8 x 45mm Bolt (33)
M8 x 53mm Bolt (38)
M8 x 55mm Bolt (37)
M8 x 15mm Screw (34)
M6 x 38mm Screw (39)
M6 x 16mm Screw (36)
M10 x 55mm Bolt (35)
PART IDENTIFICATION CHART
R
efer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual.
Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.