Weidmüller IE-SW-BL05-5TX User Manual

Unmanaged Fast Ethernet Switch
BasicLine
IE-SW-BL05 Series (from product Rev. 2.0.2)
IE-SW-BL08 Series (from product Rev. 2.0.0)
Hardware Installation Guide
Fifth Edition, June 2018
1243320000 /04/06.18
Important note:
This document and additional product information can be
downloaded using following link:
http://www.weidmueller.com
► Select Product Catalogue
 Select „Active Industrial Ethernet “
 Select „BasicLine unmanaged Switches “
 Select Product model
 Click and expand section „Downloads “
 Download needed software or documentation
Copyright Notice
Copyright  2018 Weidmüller Interface GmbH & Co. KG
All rights reserved.
Reproduction without permission is prohibited.

Weidmüller IE-SW-BL05-5TX Specifications

General

Brand	Weidmüller
Model	IE-SW-BL05-5TX
Category	Switch
Language	English

Summary

Hardware Installation Guide

DIN-Rail Mounting

Wall Mounting

Wiring Requirements

Grounding Ethernet Switch

Connect the ground screw to the grounding surface prior to connecting devices to limit EMI.

Wiring the Redundant Power Inputs

10/100Base T(x) RJ45 Pinouts

RJ45 Straight-Through Cable Wiring

RJ45 Cross-Over Cable Wiring

100BaseFX Ethernet Port Connection

SC-Port to SC-Port Cable Wiring

ST-Port to ST-Port Cable Wiring

Redundant Power Inputs

DIP Switch Settings

Explains the function of DIP switches and their default settings.

LED Indicators

Auto MDI/MDI-X Connection

Auto-Negotiation and Speed Sensing

Auto-Negotiation and Transmission Mode

Specifications

Power

Physical Characteristics

Installation

Environmental

Regulatory Approvals