Need help?Do you have a question about the weintek cMT Series and is the answer not in the manual?
General| Software | EasyBuilder Pro |
|---|---|
| Operating System | Linux |
| Processor | ARM Cortex-A8 |
| Memory | 512MB DDR3 |
| USB | 2 x USB 2.0 |
| Power Input | 24V DC |
| Operating Temperature | 0°C to 50°C |
| Protocols Supported | Modbus, MQTT, OPC UA |
| Memory Details | 512MB Flash |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% (non-condensing) |
| Model | cMT Series |
Technical specifications of the CMT-CTRL01, including memory, processor, I/O, power, and environment.
Instructions and specifications for connecting DC power to the unit.
How to locate and identify the CMT-CTRL01's IP address using UtilityManagerEX.
Steps to access and configure the CMT-CTRL01 via a web browser.
Configuration of Ethernet ports, IP, Mask, Gateway, and DNS.
Settings for configuring OPC UA server parameters.
Displays and allows modification of communication parameters for connected devices.
Steps to update the Operating System (OS) of the CMT-CTRL01.
Guide to creating a new project in EasyBuilder Pro for CMT-CTRL01.
Instructions for downloading the created project file to the CMT-CTRL01.
General configurations for the OPC UA server, including port and security.
Steps to connect CMT-CTRL01 to CODESYS via network.
To Next Page
