Weishaupt WWP LS 8-B R-E HE User Manual

Installation and operating instruction
Hydraulic unit WWP LS 8 ... 16-B
9 Servicing
83306902 2/2017-05 La
76-88
9.5 Rinse sludge separator
Observe notes on servicing [ch.9.1].
Close flow and return shut off devices of heating circuit.
Close flow and return shut off devices of hot water circuit.
Provide collecting container.
Remove end cap 4 from sludge separator 1.
Attach the enclosed angle2 (with hose) to the sludge separator.
Open the tap3 with the end cap and rinse the sludge separator.
Refill water quantity via rinsing device:
System pressure = inlet pressure + 0.5 bar.
4
1
2
3

Weishaupt WWP LS 8-B R-E HE Specifications

General

Brand	Weishaupt
Model	WWP LS 8-B R-E HE
Category	Heat Pump
Language	English