OWNERS MANUAL FOR WEISS MEDEA D/A CONVERTER
Page: 15 Date: 12/01 /dw
Power Supply:
A powerful non-switching power supply is used. All sensitive voltages have their own regulators which are separated between
left and right channels. The result is an analog output free of "digital noise" and channel crosstalk. The power switch activates
a semiconductor relais which only switches on or off at zero crossings of the mains voltage. This assures a glitch free power
switching.
Mechanical Design:
The MEDEA employs a twin metal frame. The inner chassis is made of steel and acts as a very effective shield against
electrostatic and electromagnetic radiation. The outer frame is made of massive anodized aluminium for additional shielding,
resulting in optimal heat convection and beautiful looks.
Frontpanel controls:
• Four switches with corresponding blue LEDs are used for selecting one out of four input sources.
• Two trim potentiometers set the output levels, one for the left and one for the right channel.
• A power switch.
Backpanel elements from left to right:
• Analog outputs on XLR and RCA connectors with output level range switch.
• Digital inputs 1 – 4 (three XLR, four RCA and one Toslink connectors).
• Mains connector with fuses and voltage selector.
To Next Page
Loading...
