OWNERS MANUAL FOR WEISS MEDEA D/A CONVERTER
Page: 19 Date: 12/01 /dw
Technical Data
Digital Inputs:
(3) XLR connectors, (1) Toslink connector (optical)
(4) RCA connectors
All inputs accept professional or consumer standard , i.e. accept AES/EBU or S/PDIF signals
Sampling Frequencies: 44.1, 48.0, 88.2 or 96.0 kHz on any of the four inputs
Sampling Frequencies: 176.4 and 192kHz on inputs 1 and 2 (dual-wire scheme)
Sampling frequency tolerance: +-80ppm
Maximum input wordlength: 24 Bits
Analog Outputs:
(2) XLR Connectors
(2) RCA Connectors
Servoless, DC coupled, short circuit proofed output circuitry
Output impedance: 0.2 Ohm
Output level "low" mode: variable from -infinity to +15dBu (-infinity to +9dBu asymmetrical)
Output level "high" mode: variable from -infinity to +27dBu (-infinity to +21dBu asymmetrical)
Output level variable with two multi-turn trim potentiometers
Output stage: Discrete Class A
To Next Page
Loading...
