Welch Allyn LumiView - Connecting Instrument to Portable Power Source; Recharging the Portable Power Source; Accessing Spare Lamp

Connecting Instrument to Portable Power Source:
l Plug instrument power
Portable Power Source
cord into the power cord
connector port on top of the
power source.
l Push in until firmly in place.
l Gently screw the external
connector sleeve clockwise
to secure (optional).
Recharging the Portable Power Source:
l Turn portable power source off.
l Disconnect instrument from
power source.
On/Off
l Plug charging transformer into
portable power source.
l Plug charging transformer into
wall socket. LED light indicates
unit is charging.
l Disconnect charging
transformer from power source
when fully charged, after
10-12 hours.
Accessing Spare Lamp
l Lift the spare lamp out of
its receptacle and use.
15