Weldability MIG160T - Section 7: Description of the Welding Machine Control, Adjustment and Connection Devices

Page 5 of 11
Other Technical Data
SECTION 7: DESCRIPTION OF THE WELDING MACHINE CONTROL, ADJUSTMENT AND
CONNECTION DEVICES
160
50
STEEL: 0.6
WITH PURE ARGON
AL: 0.8
STAINLESS: 0.8
FLUX CORED: 0.8
1- Main Switch and Arc Voltage Adjust
2- Wire feed rate
3- Thermostat trigger light
160A
STEEL: 0.6
AL: 0.8
STAINLESS
: 0.8