Camera Cable Connections
■ The WDP-4608MXV is also POE (Power Over Ethernet)
compatible.
Alarm output
12V/24VDC
Power Supply
BNC
Phone Jack
Wire
Plug DC Jack
Milestone
VMS
Laptop
Monitor
Speaker
Wire
IP Router
NVR Desktop
1. Install the ‘vlc-2.0.6-win32-weldex-
certification. exe’ executable file.
4. Uncheck the [Run VLC media player 2.0.6]
checkbox
5. Click on the [Finish] button to complete
the installation.
2. From the [Select the type of install]
dropdown menu, choose [custom].
3. Confirm the installation path and
click[Next] to start copying files to
the PC.
For more information, refer to the WDP-4608MXV User Operation Manual.
Rev. A
VLC Media Player 2.0.6[or Higher version] Setup
Network
WDP-4608MXV Quick Installation Guide
www.weldex.com / oem@weldex.com
Tel : (714)761-2100[USA]
Tel : +49(0)2102-528-2802[GERMANY]
Fax
: +49(0)2102-528-2804[GERMANY]
Ground
Blue wire
Green wire
Black wire
Sensor input
Installing the camera on a wall
1. Fix the case body on the wall by using Tapping Screws(BHT M4xL16).
2. Connect ethernet and accessory cables and arrange cable running not
to damage or squeeze them.
3. Pass the ethernet and power accessory cables through the hole you want
to pass them when mounting the main body on the case.
4. Assemble the Height-Strip Cover.
5. Fasten 4 screws by turning top plate clockwise.
To Next Page
Need help?
General